Industrial Valve Manufacturer in Uzbekistan | TAZ
Tashkent-based manufacturer of steel and cast-iron gate, ball, globe and check valves DN 50–1200. Technical selection and export RFQs by project specification.
Industrial pipeline valves
- Steel Wedge Gate Valve with Rising Stem — 30с41нж / 30с64нж
- High-Pressure Steel Wedge Gate Valve — 30с15нж / 30с76нж / 11ЛС60П1
- Ductile/Gray Iron Double-Disc Parallel Gate Valve — 30ч6бр
- Flanged Resilient-Seated Ductile Iron Gate Valve — 30ч39р (МЗВ)
- Austenitic Stainless Steel Wedge Gate Valve — 30нж41нж / 30нж64нж
- Industrial Inline Globe Valve (Shut-off Valve) — 15с65нж / 15с18нж
- Fully Welded Body Flanged Industrial Ball Valve — КШ.Ц.Ф (Серия ТАЗ-Газ)
- Swing Type Flanged Industrial Non-Return Check Valve — 19ч21р / 19с53нж
- Triple-Offset High Performance Metal Seated Butterfly Valve — 32ч24р / D371X
Industry applications
- Industrial valves for water and wastewater systems
- Industrial valves for power generation and steam systems
- Industrial valves for oil, gas and petrochemical projects
- Industrial valves for mining, slurry and mineral processing
Engineering resources
- How to select an industrial gate valve: DN, PN, materials and service
- GOST, EN and API valve standards: what export buyers verify
- Industrial valve RFQ checklist: how to obtain comparable quotations
- Industrial valve quality control: from casting to pressure test
- API 598 vs ISO 5208 vs EN 12266-1 for industrial valve testing
- Types of industrial valves: a practical selection guide
- PN vs ASME Class for valves: compare pressure ratings
- Industrial valve supplier for Europe: a procurement guide
- PED and CE marking for industrial valves supplied to Europe
- EN 10204 3.1 material certificates for industrial valves
- EN 1092-1 vs ASME B16.5 valve flanges: compatibility guide
- EN 558 vs ASME B16.10 valve face-to-face dimensions
- ISO 15848 fugitive-emission requirements for industrial valves
- Industrial valve supplier for Russia and CIS projects
- TR CU 032 and EAC conformity for industrial valves
- GOST 33259 vs EN 1092-1 flanges for industrial valves
- Cold-climate industrial valves: materials and specification
- Industrial valve supplier for Middle East EPC projects
- NACE MR0175 / ISO 15156 for sour-service valves
- API 6D pipeline valves: project specification guide
- API 607 vs API 6FA: fire-safe valve qualification
- Industrial valves for desalination plants: material selection
- Industrial valve vendor prequalification checklist
- Industrial valve inspection and test plan: ITP guide
- Industrial valve manufacturing record book: MRB contents
- WCB vs LCB vs WC6 valve materials: selection guide
- CF8M vs CF3M stainless steel valves: what changes?
- Ductile iron vs cast iron valves: engineering differences
- Metal-seated vs soft-seated valves: how to choose
- Rising stem vs non-rising stem gate valves
- Resilient-seated vs metal-seated gate valves
- Industrial valve actuator sizing: torque and thrust guide
- Electric vs pneumatic valve actuators: project comparison
- ATEX actuated valves for EU projects: buyer checklist
- EN 593 butterfly valves: specification guide
- EN 1984 gate valves: buyer specification guide
- ISO 12944 C5 valve coating for corrosive sites
- GOST 9544 valve leakage classes: procurement guide
- EAC declaration vs certificate for pressure equipment
- Industrial valve passport in Russian: required project data
- Duplex and super duplex valves for seawater service
- Industrial valves for Middle East district cooling
- Valve actuators for high ambient desert temperatures
- Factory acceptance test for industrial valves
- Third-party inspection of industrial valves
- Industrial valve export packaging and preservation
- Industrial valve spare parts for commissioning and two-year operation
- Industrial valves for Turkey: ordering from Tashkent for Istanbul projects
- CE marking for imported valves in Turkey: the Pressure Equipment Regulation
- Shipping industrial valves from Uzbekistan to Turkey and Europe
- Importing valves from Uzbekistan into the EU: HS codes, GSP+ and documents
- Valve manufacturer in Uzbekistan: what international buyers should check
- Resilient-seated gate valves for European water utilities: EN 1074 and approvals
- Sourcing industrial valves for German projects from outside the EU
- Industrial valves for Poland: district heating, water and UDT requirements
- Industrial valves for Romania, Bulgaria and the Balkans from Central Asia
- Industrial valves for Azerbaijan and Georgia: GOST, API and project rules
- What drives the price of industrial gate valves in an export quotation
- Gate valve vs ball valve: which one to choose for a pipeline
- Gate valve vs butterfly valve for water and district heating
- Gate valve vs globe valve: differences and where to use each
- Knife gate valve vs wedge gate valve for slurry, sludge and water
- Solid, flexible or split wedge: choosing the gate valve closure
- Parallel double-disc gate valves (30ch6br): design, benefits and limits
- Cast iron or steel gate valve: choosing the body material
- How to read Russian and GOST valve codes: 30s41nzh, 30ch39r, 15s22nzh
- Gate valve installation: orientation, flanges, bolting and start-up
- Gate valve stem leak: adjusting and replacing the gland packing
- Gate valve passing when closed: causes of seat leakage and fixes
- Gate valve stuck or hard to turn: causes and safe ways to open it
- Pressure locking and thermal binding of gate valves on steam and hot water
- Bypass on large gate valves: why it is needed and how to specify it
- Gate valve hydrostatic testing: shell strength and seat leakage tests
- Gate valves for steam: materials, wedge, packing and operating rules
- Gate valves for district heating networks: supply and return lines
- Gate valves for water mains: chamber and direct-buried installation
- Gate valve with electric actuator: selecting a multi-turn actuator
- Stainless steel gate valves: which media need them and how to pick the grade
- DN and PN explained: nominal size and nominal pressure for valves
- Valve working pressure at high temperature: reading GOST 356 and datasheets
- Swing check valve vs lift check valve: which to choose
- Check valve slam and water hammer at pumping stations: causes and fixes
- How to install a check valve: orientation, distance from pumps, common mistakes
- Globe valves: how to choose for steam, water and oil products
- Full-bore vs reduced-bore ball valves: what is the difference
- Butterfly valves: wafer, lug or double-flanged
- Triple-offset butterfly valves: when they beat gate and ball valves
- Fully welded ball valves for district heating and gas
- Flange facings under GOST 33259: types A, B, E/F and others
- Valve passport and documentation: what should come with the valve
- Valves for drinking water: materials, coatings and approvals
- Pump station valves: what goes on the suction and discharge side
- Valves for irrigation systems and irrigation pump stations
- Valves for oil depots and tank farms
- Isolation valves for gas distribution networks
- Preventive maintenance for valves: schedule and tasks
- Repair or replace a gate valve: how to decide
- Storing and preserving valves in the warehouse and on site
- Buying gate valves from Uzbekistan for Italy
- Valves for Spain and Portugal: water, irrigation and desalination
- Supplying valves to France: CE, ACS and buyer requirements
- Valves for the Netherlands and Belgium: ports, chemicals and water
- Supplying valves to the UK: UKCA, WRAS and BS EN standards
- Valves for Austria: district heating, water and ÖVGW requirements
- Supplying valves to Switzerland: outside the EU, inside its rules
- Valves for Czechia and Slovakia: district heating and industry
- Valves for Hungary: district heating, water and a logistics hub
- District heating valves for Denmark, Sweden and Finland
- Gate valves for Latvia, Lithuania and Estonia: replacing Soviet-standard valves
- Valves for Greece and Cyprus: water, irrigation and ports
- Valves for Croatia and Slovenia: the ports of Rijeka and Koper
- Valves for Serbia, Bosnia, North Macedonia and Montenegro
- Valve supplier for Izmir, Ankara and Bursa: Turkey’s industrial zones
- Gate valves for Kazakhstan: Almaty, Astana and Shymkent
- Valves for Kyrgyzstan: Bishkek, Osh and hydropower
- Valves for Tajikistan: Dushanbe, Khujand, water and power
- Valves for Turkmenistan: gas, water and transit to Turkey
- Valves for Afghanistan via Termez: water, irrigation and power
- Valves for mining and mineral processing plants: slurry, water, air
- Valves for thermal and CHP power plants: steam, feedwater, cooling
- Boiler house valves: what goes on boilers, pumps and headers
- Valves for chemical plants: materials and safety
- Valves for fertilizer plants
- Valves for food and beverage plants: sanitary versus industrial
- Valves for textile and dyeing mills
- Valves for wastewater treatment plants
- Valves for a building heating substation
- Valves for fire water systems
- Valves for commercial greenhouses: heating, irrigation, boiler house
- Valves for hydropower and small hydro plants
- Valves for cooling water circuits and cooling towers
- Valves for oil refineries
- Valves for steel and metallurgical plants: water, gases, air
- Valves for cement plants
- Valves for compressed air systems
- Valves for residential developments: what the developer buys
- Valves for industrial park and free economic zone utilities
- Valves for drinking water treatment plants